626b

[vhorl]

Still no picture for BEV, anyone else?

[kingkoyl]

none here either.........and i got really excited.......i think it's going on 2 months now

[flac]

same for me

[vhorl]

Must be for Charlie then.. shame

[kingkoyl]

anyone else have a problem with trying to download from the USB?.......keep having to put the factory file (1.01) back in so the USBworks again

[KingStar]

I have the same problem with not being able to read from the USB port. I had to turn off the receiver from the back and then I was able to load the 626B BIN.
I'm still not able to get anything from B3V either. DN seems to be working OK.

Has anyone had any success with B3V using 626B?

[Slashbub27]

No B3V here so far with the 626B.........DN seems to be ok

[arilsa]

Loaded the latest fix 626 did a factory reset and scanned the birds b3v and dn no luck, same old story for me. Also my captain usb does not work and there are also issues with hdmi connection, sometimes it works sometimes it does not. So I use component cable.
Any suggestions?

[gretz13]

I would suggest reloading the 626b and not doing factory reset. Tune to chaneel 400 (works for me) for DN and let keys roll for a while. Sometimes it takes 5 or ten minutes. I am still not getting anything for BEV and seems like no one else is either. Looks like no Christams present after all. Also make sure you downlaod the right file. Only download the HDMI file if you are using this connection otherwise it won't work.

[marinero]

file 626 for b3v working good you have to turn off the auto roll enter key manualyfor b3v and do a hard boot and this will work good but still booting every 40 minutes.

[kingkoyl]

where do you get the key to enter it manually? and when you say hard boot,you mean turning the unit off at the back?

[arilsa]

Thanks Gretz and Marinero.
It took quite a while for the autoroll say 15-20 minutes I guess. I almost gave up!
DN is working but not b3v.
Cheers to all and Happy Holidays!r

[kingkoyl]

i don't even get ch. 400 !

[arilsa]

The way I do is like this. Press exit a couple of times on your remote till you get KEY INFO. It will indicate key info. Next press the red button on the remote and it will take you to the Key Edit screen. Using the remote go to Nagra2. Scroll down to edit the keys you want.
You can use the remote to enter the keys. Once done exit after saving. All the best.

[marinero]

i got the key from www.tvkeyz.com 1- turn your auto roll for b3v off 2-put the new key manually 3-turn your unit off from the switch that is on the back of your reciver and wait 4- good luck. that work for mi.