Switch Questions?

[migga]

I have 1 dishpro 500 with the dual LNBs with the built in switch. It has two outputs for two receivers. It is connected directly to my TRIO. I've always been able to get 110 but I can never find 119.

I have a few questions:
When setting up the Trio, do i have to put the 22khz ON or OFF?
Do I have to choose a Multi-Dish Switch or leave at OFF?
Also, is there a specific TP Frequency I should have for Echo7 / Echo8/10?


Thanks in advance!

Migga

[wawaweh]

If you can get 110 then 119 will come in fine as well. You need to fine tune your dish, it appears that you need to adjust your skew to get both sat. Good Luck

[No_PaRoLe]

You may be to adjust your settings....

Welcome to the site.....

Try something similiar to below.....

LNB TYPE OCS-DP
22KHz off
Diseqc 1 for 119 and Diseqc 2 for 110