Conaxsat (CNX) Nano 2 Setup Intructions

[mental]

c/p
Instructions

1. Upgrade the nano2 with latest NPB NPN file for the Nano II

2. After the upgrade goto Menu -> Accessory ->RS-232 Mode and select Type to Normal.

3. Connect the ethernet adapter to RS-232 Port.

4. Connect the Lan line to the ethernet adapter.

5. Go to Menu Installations -> Network ->set Networking Setting to Auto.

6. It should automatically bring up your IP information then press apply.

7. When it has been set up correctly go to Bev/DN N3 Channel and the dongle will try to connect to the server. Press OK

[wnw4j]

There is no rs232 option after the latest upgrade(file 1.17).
any idea?
network is working. iks was able to register
thnx,

[mich_pat]

There is no need for that since you have to set it to "normal" anyway and the dongle option dont apply
for the nano2.Hope this helps.