Choosing which Satellite and channels--help

[gillani]

I have an Ariza 750cx.
One Lnb (DishPro) and a 18" Satellite Dish.

I have it aligned and receive good quality and signal from what seems to be the following when I use LNB Standard and LNB Local-Freq. 11250

Echo 4
Echo 7
Echo 1.2
Echo 9

Does this mean I get all the channels from all of the satellites, it seems when I do a power scan I get the same channels no matter what sat I choose?

Thanks

[No_PaRoLe]

I am not familiar with that receiver but if i am npot mistaken your LNB type should be OCS-DP

[coorslightly]

you cannot get all four sats with one lnb. its impossible. Echostar 7 which is 119 is the best one of the four birds you mentioned above. point it at 119 degrees W . and do a scan of that bird.

[changdamyeuem]

With DishPro dish, skew to recommended degree, elevation, catching 110W, 119W. That should be EcoStar6,7,8 and the other dish, point to (?). I am not sure but I suggest point to 91W Make sure to use port1, port 2, port 3 for each Sat number. Also make sure in SAT setting, select All satelilites, otherwise you only can view (1)selected Sat. Don't forget to edit city and state in which you reside in order to view local channels.

[txsgent]

If you are sure you only have 1 lnb, and it is DP, I agree with changdamyeuem, point the dish at 91, use the sat locator in my signature, to get the best settings and your settings would be like this. For a DP LNB.....

LNB Power On
LNB Type OCS-DP
LNB Freq 11250
22Khz OFF
TP Freq 12224
Motor Off/none
DiseqC None
Legacy SW None
good luck, keep us posted, txsgent