Quote:
Originally Posted by kingyahoo
Thanks Grashopper. I had the dish and LNB professionally installed. I have for the past five years been able to download the fix, go through installation, chose the correct Sat (110 and 119) and as switch I have Legacy 1 and 2. I know on which Sat the channel is by using the remote (SAT). I have disconnected the plug, switched the receiver off and started all over again with the same result: just few channels. Unfortunately, there is no one in my town now who professionally provide technical services. It is not a big deal right now because I have digital cable, but I do miss my usual channels. Thanks again.
|
Try this...but make sure you delete all channels before you start. make sure auto TP update is turned off (turn it back on after). In dish setup, change your TP till you get the best signal quality possible...Then do an auto scan of just that sat...exit and save. Do the same for the second sat..Try to do this on a nice clear day...
Hopefully this gets you the missing channels!!
Cheers
__________________
"You can't depend on your eyes when your imagination is out of focus"
Mark Twain
Please read or search the forums before you post!
Please don't hijack a thread!!!
Above all else have fun!!!
Become a VIP..it goes directly to supporting this site!!!