Here is some info on Alternative for NOI & IKS4SUNS - all credit goes to W30
The program is work by W30 IKS4SUNS is what he has labeled it..follow the steps in first post for settup... the 150 is the same setup as the original post this just allows for multi receivers with a different usser and password for each receiver..and can be used with 2 or more ps ..I ran IKS4Suns ver 1.0.exec file, I inputted all the info from my donation for user name, password and port plus my ip addy from my receiver, the new domain name from nfps the des key exactly like it is in N.O.I. on STB1, save it then exit, restart, tick enable stb then click start and let it do its thing, put it on a working channell and it should roll in..
You need to add the IP address of your receiver on the set up screen and run the app as administrator. Don't forget the firewall rules if you have one running.
single or multiple STBs
each STB may have a different providers
multiple provider setups may be applied to the same STB (if one server go down use the other
I have NF HD. What IP do I use? Every time I start the program, it says Bad STB data IKS4SUNS will end..That error refer to data you entered on the fields. make sure you enter 0 (zero) not O, ip address with leading zeros .020 is not allowed s/b .20, missing data, etc
it is very general as an error and until all data is ok you will nor be able to start IKS4SUNS.
there are 2 ip addresses, 1 is the provider's ip the other is the home network's ip address of your nfusion...hope this helps and I put some of the ? an answers for some of the issues on settup..