How to flash Captiveworks 800s PVR

[Grasshopper]

How to flash Captiveworks 800s PVR

1 - Download/Unzip files. transfer files onto USB stick then plug it into the box. You should see a message that says USB ready
2 - Now press the USB button on remote, highlight the files that you want to use, hit OK to load it. Now you will see this message “Do you want to update software/database?” Hit “YES”
3 – After it’s done, it will ask you “Do you want to reboot your receiver?” Hit “YES”

http://i200.photobucket.com/albums/aa317/free2air_fta/8-1.jpg http://i200.photobucket.com/albums/aa317/free2air_fta/12-3.jpg

How to setup your dish setting and Scan

1 – Menu, Installation, Antenna setting
2 – Select your Satellites
3 – Change your LNB type, Diseqc Switch to match with all your hardwares
4 – On the bottom screen, there are four options: Auto, Network, Blindscan and Transponder scan. Select one of these option to scan it.

http://i200.photobucket.com/albums/aa317/free2air_fta/14-1.jpg http://i200.photobucket.com/albums/aa317/free2air_fta/16-1.jpg

Final Step before you enjoy your new receiver:

After it's done with all the scanning, press Exit out of the Menu. Now Press F1 000 on the remote control to enable patch. You should see message on TV that say PATCH ENABLED. Now just wait for the keys to roll and watch TV.

GH

[Grasshopper]

http://i200.photobucket.com/albums/aa317/free2air_fta/6-1.jpg http://i200.photobucket.com/albums/aa317/free2air_fta/16-1.jpg

http://i200.photobucket.com/albums/aa317/free2air_fta/21-1.jpg

[thompson_101]

i have a cw-800s and are i flash it and setup channels they are all just numbers and read scramble channel... any tips?:banghead

[No_PaRoLe]

thompson 101, welcome to the site. First make sure that you have the most up to date file. Check in the files section. Next the most common mistake is that many forget to "enable patch"

See above in the post by GH...

[thompson_101]

ok i got that all worked out, but im still not getting any programing, i get all of the channels but no descripton, or what station they are. is there something else that i have to do? thanks!

[vickydj1974]

i new with 800 i factory defailt after chanels scrambled plz help me

[Grasshopper]

Have you resetup your dish setting and enable patch? I will close this thead, please open the new thread in discussion forum.

Thanks