loaded new bin channels still black help pls

[danielgirl24]

Ihave new bin loade but have no channels.CAN SEE THIRD PARTY KEYS .Do you have to enable a patch or something?pls help.

[timer]

Havent seen that model yet,look for f1 and enter 000 to enable patch.

[danielgirl24]

there is no f1.i have no clue what to do next.thanks

[rod2590]

Evening danielgirl!...could you tell me what bins you have loaded,have you done a sat scan and did you save after doing each process?

[rod2590]

You should have 1.0.1.1 as your first bin in operating system,then 1.01.13 then load lastest bin cw3000-sc 05/14/08 if after all this key check comes up let it roll usually leave mine on 175 for dn and 2212 for bev Ihave a 2000 off-set to separate bev and dn so yours would be 212 for bev...that fails try re-scan and be sure to save after scan

[danielgirl24]

Hi. How Do You Do 2000 Offset?

[danielgirl24]

I HAVE 1.01.13 LOADED WHEN I RECEIVED IT.HAVE PICTURE NOW BUT STARTED GETTING FREEZING AND NO PICTURE ON SOME CHANNELS FOR SOME REASON. hAVE GOOD SIGNAL AND QUALITY ON ALL SATS.THNKS FOR ALL THE HELP EVERYONE.

[LIVEUPDATE]

have u tried a factory defaul yet, also try a hard boot(turn off then on from back of reciever).

[rod2590]

To do the off-set go to Admin..then to sat...you,ll see an edit button..click on that for the sats your set to insert 2000 click save....you,ll have to re-scan your says again !

[rod2590]

sry sats again!

[TD52]

ok
that is a Linux receiver with a media center built in...so you can go on the net and download and update at the same time
you don't need a windows system to do all the extra work..so try have your 3000 to do the work
then it may work for you
you can do everything from the that system...won't need winblows again unless you want to